Permafrost thaw/degradation in the Northern Hemisphere due to global warming is projected to accelerate in coming decades. Assessment of this trend requires improved understanding of the evolution and dynamics of permafrost areas. Land surface models (LSMs) are well-suited for this due to their physical basis and large-scale applicability. However, LSM application is challenging because (a) LSMs demand extensive and accurate meteorological forcing data, which are not readily available for historic conditions and only available with significant biases for future climate, (b) LSMs possess a large number of model parameters, and (c) observations of thermal/hydraulic regimes to constrain those parameters are severely limited. This study addresses these challenges by applying the MESH-CLASS modeling framework (Modélisation Environmenntale communautaire—Surface et Hydrology embedding the Canadian Land Surface Scheme) to three regions within the Mackenzie River Basin, Canada, under various meteorological forcing data sets, using the variogram analysis of response surfaces framework for sensitivity analysis and threshold-based identifiability analysis. The study shows that the modeler may face complex trade-offs when choosing a forcing data set; for current and future scenarios, forcing data require multi-variate bias correction, and some data sets enable the representation of some aspects of permafrost dynamics, but are inadequate for others. The results identify the most influential model parameters and show that permafrost simulation is most sensitive to parameters controlling surface insulation and runoff generation. But the identifiability analysis reveals that many of the most influential parameters are unidentifiable. These conclusions can inform future efforts for data collection and model parameterization.

Permafrost thaw/degradation in the Northern Hemisphere due to global warming is projected to accelerate in coming decades. Assessment of this trend requires improved understanding of the evolution and dynamics of permafrost areas. Land surface models (LSMs) are well-suited for this due to their physical basis and large-scale applicability. However, LSM application is challenging because (a) LSMs demand extensive and accurate meteorological forcing data, which are not readily available for historic conditions and only available with significant biases for future climate, (b) LSMs possess a large number of model parameters, and (c) observations of thermal/hydraulic regimes to constrain those parameters are severely limited. This study addresses these challenges by applying the MESH-CLASS modeling framework (Modélisation Environmenntale communautaire—Surface et Hydrology embedding the Canadian Land Surface Scheme) to three regions within the Mackenzie River Basin, Canada, under various meteorological forcing data sets, using the variogram analysis of response surfaces framework for sensitivity analysis and threshold-based identifiability analysis. The study shows that the modeler may face complex trade-offs when choosing a forcing data set; for current and future scenarios, forcing data require multi-variate bias correction, and some data sets enable the representation of some aspects of permafrost dynamics, but are inadequate for others. The results identify the most influential model parameters and show that permafrost simulation is most sensitive to parameters controlling surface insulation and runoff generation. But the identifiability analysis reveals that many of the most influential parameters are unidentifiable. These conclusions can inform future efforts for data collection and model parameterization.

Abstract. Hydrologic-land surface models (H-LSMs) provide physically-based understanding and predictions of the current and future states of the world’s vast high-latitude permafrost regions. Two major challenges, however, hamper their parametrization and validation when concurrently representing hydrology and permafrost. One is the high computational complexity, exacerbated by the need to include a deep soil profile to adequately capture the freeze/thaw cycles and heat storage. The other is that soil-temperature data are severely limited, and traditional model validation, based on streamflow, can show the right fit to these data for the wrong reasons. There are few observational sites for such vast, heterogeneous regions, and remote sensing provides only limited support. In light of these challenges, we develop 16 parametrizations of a Canadian H-LSM, MESH, for the sub-arctic Liard River Basin and validate them using three data sources: streamflows at multiple gauges, soil temperature profiles from few available boreholes, and multiple permafrost maps. The different parametrizations favor different sources of data and it is challenging to configure a model faithful to all three data sources, which are at times inconsistent with each other. Overall, the results show that: (1) surface insulation through snow cover primarily regulates permafrost dynamics after model initialization effects decay over, relatively long time and (2) different parametrizations yield different partitioning patterns of solid-vs-liquid soil-water and produce different low-flow but similar high-flow regimes. We conclude that, given data scarcity, an ensemble of model parametrizations is essential to provide a reliable picture of the current states and future spatio-temporal co-evolution of permafrost and hydrology.

Permafrost plays an important role in the hydrology of arctic/subarctic regions. However, permafrost thaw/degradation has been observed over recent decades in the Northern Hemisphere and is projected to accelerate. Hence, understanding the evolution of permafrost areas is urgently needed. Land surface models (LSMs) are well-suited for predicting permafrost dynamics due to their physical basis and large-scale applicability. However, LSM application is challenging because of the large number of model parameters and the complex memory of state variables. Significant interactions among the underlying processes and the paucity of observations of thermal/hydraulic regimes add further difficulty. This study addresses the challenges of LSM application by evaluating the uncertainty due to meteorological forcing, assessing the sensitivity of simulated permafrost dynamics to LSM parameters, and highlighting issues of parameter identifiability. Modelling experiments are implemented using the MESH-CLASS framework. The VARS sensitivity analysis and traditional threshold-based identifiability analysis are used to assess various aspects of permafrost dynamics for three regions within the Mackenzie River Basin. The study shows that the modeller may face significant trade-offs when choosing a forcing dataset as some datasets enable the representation of some aspects of permafrost dynamics, while being inadequate for others. The results also emphasize the high sensitivity of various aspects of permafrost simulation to parameters controlling surface insulation and soil texture; a detailed list of influential parameters is presented. Identifiability analysis reveals that many of the most influential parameters for permafrost simulation are unidentifiable. These conclusions will hopefully inform future efforts in data collection and model parametrization.

Permafrost thaw has been observed in recent decades in the Northern Hemisphere and is expected to accelerate with continued global warming. Predicting the future of permafrost requires proper representation of the interrelated surface/subsurface thermal and hydrologic regimes. Land surface models (LSMs) are well suited for such predictions, as they couple heat and water interactions across soil-vegetation-atmosphere interfaces and can be applied over large scales. LSMs, however, are challenged by the long-term thermal and hydraulic memories of permafrost and the paucity of historical records to represent permafrost dynamics under transient climate conditions. In this study, we aim to understand better how LSMs function under different spin-up states, which facilitates addressing the challenge of model initialization by characterizing the impact of initial climate conditions and initial soil frozen and liquid water contents on the simulation length required to reach equilibrium. Further, we quantify how the uncertainty in model initialization propagates to simulated permafrost dynamics. Modelling experiments are conducted with the Modélisation Environmentale Communautaire—Surface and Hydrology (MESH) framework and its embedded Canadian land surface scheme (CLASS). The study area is in the Liard River basin in the Northwest Territories of Canada with sporadic and discontinuous regions. Results show that uncertainty in model initialization controls various attributes of simulated permafrost, especially the active layer thickness, which could change by 0.5–1.5 m depending on the initial condition chosen. The least number of spin-up cycles is achieved with near field capacity condition, but the number of cycles varies depending on the spin-up year climate. We advise an extended spin-up of 200–1000 cycles to ensure proper model initialization under different climatic conditions and initial soil moisture contents.

Cold regions provide water resources for half the global population yet face rapid change. Their hydrology is dominated by snow, ice and frozen soils, and climate warming is having profound effects. Hydrological models have a key role in predicting changing water resources but are challenged in cold regions. Ground-based data to quantify meteorological forcing and constrain model parameterization are limited, while hydrological processes are complex, often controlled by phase change energetics. River flows are impacted by poorly quantified human activities. This paper discusses the scientific and technical challenges of the large-scale modelling of cold region systems and reports recent modelling developments, focussing on MESH, the Canadian community hydrological land surface scheme. New cold region process representations include improved blowing snow transport and sublimation, lateral land-surface flow, prairie pothole pond storage dynamics, frozen ground infiltration and thermodynamics, and improved glacier modelling. New algorithms to represent water management include multistage reservoir operation. Parameterization has been supported by field observations and remotely sensed data; new methods for parameter identification have been used to evaluate model uncertainty and support regionalization. Additionally, MESH has been linked to broader decision-support frameworks, including river ice simulation and hydrological forecasting. The paper also reports various applications to the Saskatchewan and Mackenzie River basins in western Canada (0.4 and 1.8 million km2). These basins arise in glaciated mountain headwaters, are partly underlain by permafrost, and include remote and incompletely understood forested, wetland, agricultural and tundra ecoregions. These illustrate the current capabilities and limitations of cold region modelling, and the extraordinary challenges to prediction, including the need to overcoming biases in forcing data sets, which can have disproportionate effects on the simulated hydrology.

Abstract Obtaining reliable water balance estimates remains a major challenge in Canada for large regions with scarce in situ measurements. Various remote sensing products can be used to complement observation-based datasets and provide an estimate of the water balance at river basin or regional scales. This study provides an assessment of the water balance using combinations of various remote sensing and data assimilation-based products and quantifies the non-closure errors for river basins across Canada, ranging from 90,900 to 1,679,100 km 2 , for the period from 2002 to 2015. A water balance equation combines the following to estimate the monthly water balance closure: multiple sources of data for each water budget component, including two precipitation products - the global product WATCH Forcing Data ERA-Interim (WFDEI), and the Canadian Precipitation Analysis (CaPA); two evapotranspiration products - MODIS, and Global Land-surface Evaporation: the Amsterdam Methodology (GLEAM); one source of water storage data - GRACE from three different centers; and observed discharge data from hydrometric stations (HYDAT). The non-closure error is attributed to the different data products using a constrained Kalman filter. Results show that the combination of CaPA, GLEAM, and the JPL mascon GRACE product tended to outperform other combinations across Canadian river basins. Overall, the error attributions of precipitation, evapotranspiration, water storage change, and runoff were 36.7, 33.2, 17.8, and 12.2 percent, which corresponded to 8.1, 7.9, 4.2, and 1.4 mm month -1 , respectively. In particular, non-closure error from precipitation dominated in Western Canada, whereas that from evapotranspiration contributed most in the Mackenzie River basin.

Cold regions provide water resources for half the global population yet face rapid change. Their hydrology is dominated by snow, ice and frozen soils, and climate warming is having profound effects. Hydrological models have a key role in predicting changing water resources, but are challenged in cold regions. Ground-based data to quantify meteorological forcing and constrain model parameterization are limited, while hydrological processes are complex, often controlled by phase change energetics. River flows are impacted by poorly quantified human activities. This paper reports scientific developments over the past decade of MESH, the Canadian community hydrological land surface scheme. New cold region process representation includes improved blowing snow transport and sublimation, lateral land-surface flow, prairie pothole storage dynamics, frozen ground infiltration and thermodynamics, and improved glacier modelling. New algorithms to represent water management include multi-stage reservoir operation. Parameterization has been supported by field observations and remotely sensed data; new methods for parameter identification have been used to evaluate model uncertainty and support regionalization. Additionally, MESH has been linked to broader decision-support frameworks, including river ice simulation and hydrological forecasting. The paper also reports various applications to the Saskatchewan and Mackenzie River basins in western Canada (0.4 and 1.8 million km). These basins arise in glaciated mountain headwaters, are partly underlain by permafrost, and include remote and incompletely understood forested, wetland, agricultural and tundra ecoregions. This imposes extraordinary challenges to prediction, including the need to overcoming biases in forcing data sets, which can have disproportionate effects on the simulated hydrology.

Abstract. The interior of western Canada, like many similar cold mid- to high-latitude regions worldwide, is undergoing extensive and rapid climate and environmental change, which may accelerate in the coming decades. Understanding and predicting changes in coupled climate–land–hydrological systems are crucial to society yet limited by lack of understanding of changes in cold-region process responses and interactions, along with their representation in most current-generation land-surface and hydrological models. It is essential to consider the underlying processes and base predictive models on the proper physics, especially under conditions of non-stationarity where the past is no longer a reliable guide to the future and system trajectories can be unexpected. These challenges were forefront in the recently completed Changing Cold Regions Network (CCRN), which assembled and focused a wide range of multi-disciplinary expertise to improve the understanding, diagnosis, and prediction of change over the cold interior of western Canada. CCRN advanced knowledge of fundamental cold-region ecological and hydrological processes through observation and experimentation across a network of highly instrumented research basins and other sites. Significant efforts were made to improve the functionality and process representation, based on this improved understanding, within the fine-scale Cold Regions Hydrological Modelling (CRHM) platform and the large-scale Modélisation Environmentale Communautaire (MEC) – Surface and Hydrology (MESH) model. These models were, and continue to be, applied under past and projected future climates and under current and expected future land and vegetation cover configurations to diagnose historical change and predict possible future hydrological responses. This second of two articles synthesizes the nature and understanding of cold-region processes and Earth system responses to future climate, as advanced by CCRN. These include changing precipitation and moisture feedbacks to the atmosphere; altered snow regimes, changing balance of snowfall and rainfall, and glacier loss; vegetation responses to climate and the loss of ecosystem resilience to wildfire and disturbance; thawing permafrost and its influence on landscapes and hydrology; groundwater storage and cycling and its connections to surface water; and stream and river discharge as influenced by the various drivers of hydrological change. Collective insights, expert elicitation, and model application are used to provide a synthesis of this change over the CCRN region for the late 21st century.

Hydrologic-Land Surface Models (H-LSMs) have been progressively developed to a stage where they represent the dominant hydrological processes for a variety of hydrological regimes and include a range of water management practices, and are increasingly used to simulate water storages and fluxes of large basins under changing environmental conditions across the globe. However, efforts for comprehensive evaluation of the utility of H-LSMs in large, regulated watersheds have been limited. In this study, we evaluated the capability of a Canadian H-LSM, called MESH, in the highly regulated Saskatchewan River Basin (SaskRB), Canada, under the constraint of significant precipitation uncertainty. A comprehensive analysis of the MESH model performance was carried out in two steps. First, the reliability of multiple precipitation products was evaluated against climate station observations and based on their performance in simulating streamflow across the basin when forcing the MESH model with a default parameterization. Second, a state-of-the-art multi-criteria calibration approach was applied, using various observational information including streamflow, storage and fluxes for calibration and validation. The first analysis shows that the quality of precipitation products had a direct and immediate impact on simulation performance for the basin headwaters but effects were dampened when going downstream. The subsequent analyses show that the MESH model was able to capture observed responses of multiple fluxes and storage across the basin using a global multi-station calibration method. Despite poorer performance in some basins, the global parameterization generally achieved better model performance than a default model parameterization. Validation using storage anomaly and evapotranspiration generally showed strong correlation with observations, but revealed potential deficiencies in the simulation of storage anomaly over open water areas. Keywords: Precipitation Uncertainty, Hydrologic-Land Surface Models, multi-criteria calibration, storage and fluxes validation, Saskatchewan River Basin, Canada

Abstract. Cold region hydrology is very sensitive to the impacts of climate warming. Impacts of warming over recent decades in western Canada include glacier retreat, permafrost thaw, and changing patterns of precipitation, with an increased proportion of winter precipitation falling as rainfall and shorter durations of snow cover, as well as consequent changes in flow regimes. Future warming is expected to continue along these lines. Physically realistic and sophisticated hydrological models driven by reliable climate forcing can provide the capability to assess hydrological responses to climate change. However, the provision of reliable forcing data remains problematic, particularly in data-sparse regions. Hydrological processes in cold regions involve complex phase changes and so are very sensitive to small biases in the driving meteorology, particularly in temperature and precipitation, including precipitation phase. Cold regions often have sparse surface observations, particularly at high elevations that generate a large amount of runoff. This paper aims to provide an improved set of forcing data for large-scale hydrological models for climate change impact assessment. The best available gridded data in Canada are from the high-resolution forecasts of the Global Environmental Multiscale (GEM) atmospheric model and outputs of the Canadian Precipitation Analysis (CaPA), but these datasets have a short historical record. The EU WATCH ERA-Interim reanalysis (WFDEI) has a longer historical record but has often been found to be biased relative to observations over Canada. The aim of this study, therefore, is to blend the strengths of both datasets (GEM-CaPA and WFDEI) to produce a less-biased long-record product (WFDEI-GEM-CaPA) for hydrological modelling and climate change impact assessment over the Mackenzie River Basin. First, a multivariate generalization of the quantile mapping technique was implemented to bias-correct WFDEI against GEM-CaPA at 3 h ×0.125∘ resolution during the 2005–2016 overlap period, followed by a hindcast of WFDEI-GEM-CaPA from 1979. The derived WFDEI-GEM-CaPA data are validated against station observations as a preliminary step to assess their added value. This product is then used to bias-correct climate projections from the Canadian Centre for Climate Modelling and Analysis Canadian Regional Climate Model (CanRCM4) between 1950 and 2100 under RCP8.5, and an analysis of the datasets shows that the biases in the original WFDEI product have been removed and the climate change signals in CanRCM4 are preserved. The resulting bias-corrected datasets are a consistent set of historical and climate projection data suitable for large-scale modelling and future climate scenario analysis. The final historical product (WFDEI-GEM-CaPA, 1979–2016) is freely available at the Federated Research Data Repository at https://doi.org/10.20383/101.0111 (Asong et al., 2018), while the original and corrected CanRCM4 data are available at https://doi.org/10.20383/101.0162 (Asong et al., 2019).

Global Institute for Water Security, School of Environment and Sustainability, Department of Civil, Geological, and Environmental Engineering, University of Saskatchewan, Saskatoon, Saskatchewan, Canada School of Geographical Sciences and Urban Planning, Arizona State University, Tempe, Arizona School of Civil, Environmental and Mining Engineering, University of Adelaide, Adelaide, Australia Water Institute and Department of Economics, University of Waterloo, Waterloo, Ontario, Canada Institute for Environmental Studies, Vrije Universiteit Amsterdam, Amsterdam, The Netherlands Department of Civil and Environmental Engineering, Imperial College London, London, UK

Abstract The hydrology of cold regions has been studied for decades with substantial progress in process understanding and prediction. Simultaneously, work on nutrient yields from agricultural land in cold regions has shown much slower progress. Advancement of nutrient modelling is constrained by well-documented issues of spatial heterogeneity, climate dependency, data limitations and over-parameterization of models, as well as challenges specific to cold regions due to the complex (and often unknown) behaviour of hydro-biogeochemical processes at temperatures close to and below freezing where a phase change occurs. This review is a critical discussion of these issues by taking a close look at the conceptual models and methods behind used catchment nutrient models. The impact of differences in model structure and the methods used for the prediction of hydrological processes, erosion and biogeochemical cycles are examined. The appropriateness of scale, scope, and complexity of models are discussed to propose future research directions.

Abstract. Permafrost is an important feature of cold-region hydrology, particularly in river basins such as the Mackenzie River basin (MRB), and it needs to be properly represented in hydrological and land surface models (H-LSMs) built into existing Earth system models (ESMs), especially under the unprecedented climate warming trends that have been observed. Higher rates of warming have been reported in high latitudes compared to the global average, resulting in permafrost thaw with wide-ranging implications for hydrology and feedbacks to climate. The current generation of H-LSMs is being improved to simulate permafrost dynamics by allowing deep soil profiles and incorporating organic soils explicitly. Deeper soil profiles have larger hydraulic and thermal memories that require more effort to initialize. This study aims to devise a robust, yet computationally efficient, initialization and parameterization approach applicable to regions where data are scarce and simulations typically require large computational resources. The study further demonstrates an upscaling approach to inform large-scale ESM simulations based on the insights gained by modelling at small scales. We used permafrost observations from three sites along the Mackenzie River valley spanning different permafrost classes to test the validity of the approach. Results show generally good performance in reproducing present-climate permafrost properties at the three sites. The results also emphasize the sensitivity of the simulations to the soil layering scheme used, the depth to bedrock, and the organic soil properties.

Blowing snow is ubiquitous in cold, windswept environments. In some regions, blowing snow sublimation losses can ablate a notable fraction of the seasonal snowfall. It is advantageous to predict alpine snow regimes at the spatial scale of snowdrifts (≈1 to 100 m) because of the role of snow redistribution in governing the duration and volume of snowmelt. However, blowing snow processes are often neglected due to computational costs. Here, a three‐dimensional blowing snow model is presented that is spatially discretized using a variable resolution unstructured mesh. This represents the heterogeneity of the surface explicitly yet, for the case study reported, gained a 62% reduction in computational elements versus a fixed‐resolution mesh and resulted in a 44% reduction in total runtime. The model was evaluated for a subarctic mountain basin using transects of measured snow water equivalent (SWE) in a tundra valley. Including blowing snow processes improved the prediction of SWE by capturing inner‐annual snowdrift formation, more than halved the total mean bias error, and increased the coefficient of variation of SWE from 0.04 to 0.31 better matching the observed CV (0.41). The use of a variable resolution mesh did not dramatically degrade the model performance. Comparison with a constant resolution mesh showed a similar CV and RMSE as the variable resolution mesh. The constant resolution mesh had a smaller mean bias error. A sensitivity analysis showed that snowdrift locations and immediate up‐wind sources of blowing snow are the most sensitive areas of the landscape to wind speed variations.

Abstract. Despite debate in the rainfall–runoff hydrology literature about the merits of physics-based and spatially distributed models, substantial work in cold-region hydrology has shown improved predictive capacity by including physics-based process representations, relatively high-resolution semi-distributed and fully distributed discretizations, and the use of physically identifiable parameters that require limited calibration. While there is increasing motivation for modelling at hyper-resolution (< 1 km) and snowdrift-resolving scales (≈ 1 to 100 m), the capabilities of existing cold-region hydrological models are computationally limited at these scales. Here, a new distributed model, the Canadian Hydrological Model (CHM), is presented. Although designed to be applied generally, it has a focus for application where cold-region processes play a role in hydrology. Key features include the ability to do the following: capture spatial heterogeneity in the surface discretization in an efficient manner via variable-resolution unstructured meshes; include multiple process representations; change, remove, and decouple hydrological process algorithms; work at both a point and spatially distributed scale; scale to multiple spatial extents and scales; and utilize a variety of forcing fields (boundary and initial conditions). This paper focuses on the overall model philosophy and design, and it provides a number of cold-region-specific features and examples.

Abstract. Hydrologic-Land Surface Models (H-LSMs) have been progressively developed to a stage where they represent the dominant hydrological processes for a variety of hydrological regimes and include a range of water management practices, and are increasingly used to simulate water storages and fluxes of large basins under changing environmental conditions across the globe. However, efforts for comprehensive evaluation of the utility of H-LSMs in large, regulated watersheds have been limited. In this study, we evaluated the capability of a Canadian H-LSM, called MESH, in the highly regulated Saskatchewan River Basin (SaskRB), Canada, under the constraint of significant precipitation uncertainty. The SaskRB is a complex system characterized by hydrologically-distinct regions that include the Rocky Mountains, Boreal Forest, and the Prairies. This basin is highly vulnerable to potential climate change and extreme events. A comprehensive analysis of the MESH model performance was carried out in two steps. First, the reliability of multiple precipitation products was evaluated against climate station observations and based on their performance in simulating streamflow across the basin when forcing the MESH model with a default parameterization. Second, a state-of-the-art multi-criteria calibration approach was applied, using various observational information including streamflow, storage and fluxes for calibration and validation. The first analysis shows that the quality of precipitation products had a direct and immediate impact on simulation performance for the basin headwaters but effects were dampened when going downstream. In particular, the Canadian Precipitation Analysis (CaPA) performed the best among the precipitation products in capturing timings and minimizing the magnitude of error against observation, despite a general underestimation of precipitation amount. The subsequent analyses show that the MESH model was able to capture observed responses of multiple fluxes and storage across the basin using a global multi-station calibration method. Despite poorer performance in some basins, the global parameterization generally achieved better model performance than a default model parameterization. Validation using storage anomaly and evapotranspiration generally showed strong correlation with observations, but revealed potential deficiencies in the simulation of storage anomaly over open water areas.

Abstract. Reservoirs significantly affect flow regimes in watershed systems by changing the magnitude and timing of streamflows. Failure to represent these effects limits the performance of hydrological and land surface models (H-LSMs) in the many highly regulated basins across the globe and limits the applicability of such models to investigate the futures of watershed systems through scenario analysis (e.g., scenarios of climate, land use, or reservoir regulation changes). An adequate representation of reservoirs and their operation in an H-LSM is therefore essential for a realistic representation of the downstream flow regime. In this paper, we present a general parametric reservoir operation model based on piecewise linear relationships between reservoir storage, inflow, and release, to approximate actual reservoir operations. For the identification of the model parameters, we propose two strategies: (a) a generalized parameterization that requires a relatively limited amount of data; and (b) direct calibration via multi-objective optimization when more data on historical storage and release are available. We use data from 37 reservoir case studies located in several regions across the globe for developing and testing the model. We further build this reservoir operation model into the MESH modelling system, which is a large-scale H-LSM. Our results across the case studies show that the proposed reservoir model with both of the parameter identification strategies leads to improved simulation accuracy compared with the other widely used approaches for reservoir operation simulation. We further show the significance of enabling MESH with this reservoir model and discuss the interdependent effects of the simulation accuracy of natural processes and that of reservoir operation on the overall model performance. The reservoir operation model is generic and can be integrated into any H-LSM.

Abstract. Reservoirs significantly affect flow regimes in watershed systems by changing the magnitude and timing of streamflows. Failure to represent these effects limits the performance of hydrological and land-surface models (H-LSMs) in the many highly regulated basins across the globe and limits the applicability of such models to investigate the futures of watershed systems through scenario analysis (e.g., scenarios of climate, land use, or reservoir regulation changes). An adequate representation of reservoirs and their operation in an H-LSM is therefore essential for a realistic representation of the downstream flow regime. In this paper, we present a general parametric reservoir operation model based on piecewise-linear relationships between reservoir storage, inflow, and release to approximate actual reservoir operations. For the identification of the model parameters, we propose two strategies: (a) a “generalized” parameterization that requires a relatively limited amount of data and (b) direct calibration via multi-objective optimization when more data on historical storage and release are available. We use data from 37 reservoir case studies located in several regions across the globe for developing and testing the model. We further build this reservoir operation model into the MESH (Modélisation Environmentale-Surface et Hydrologie) modeling system, which is a large-scale H-LSM. Our results across the case studies show that the proposed reservoir model with both parameter-identification strategies leads to improved simulation accuracy compared with the other widely used approaches for reservoir operation simulation. We further show the significance of enabling MESH with this reservoir model and discuss the interdependent effects of the simulation accuracy of natural processes and that of reservoir operations on the overall model performance. The reservoir operation model is generic and can be integrated into any H-LSM.

There is great interest in modelling the export of nitrogen (N) and phosphorus (P) from agricultural fields because of ongoing challenges of eutrophication. However, the use of existing hydrochemistry models can be problematic in cold regions because models frequently employ incomplete or conceptually incorrect representations of the dominant cold regions hydrological processes and are overparameterized, often with insufficient data for validation. Here, a process‐based N model, WINTRA, which is coupled to a physically based cold regions hydrological model, was expanded to simulate P and account for overwinter soil nutrient biochemical cycling. An inverse modelling approach, using this model with consideration of parameter equifinality, was applied to an intensively monitored agricultural basin in Manitoba, Canada, to help identify the main climate, soil, and anthropogenic controls on nutrient export. Consistent with observations, the model results suggest that snow water equivalent, melt rate, snow cover depletion rate, and contributing area for run‐off generation determine the opportunity time and surface area for run‐off–soil interaction. These physical controls have not been addressed in existing models. Results also show that the time lag between the start of snowmelt and the arrival of peak nutrient concentration in run‐off increased with decreasing antecedent soil moisture content, highlighting potential implications of frozen soils on run‐off processes and hydrochemistry. The simulations showed TDP concentration peaks generally arriving earlier than NO₃ but also decreasing faster afterwards, which suggests a significant contribution of plant residue Total dissolved Phosphorus (TDP) to early snowmelt run‐off. Antecedent fall tillage and fertilizer application increased TDP concentrations in spring snowmelt run‐off but did not consistently affect NO₃ run‐off. In this case, the antecedent soil moisture content seemed to have had a dominant effect on overwinter soil N biogeochemical processes such as mineralization, which are often ignored in models. This work demonstrates both the need for better representation of cold regions processes in hydrochemical models and the model improvements that are possible if these are included.

Abstract Land models are increasingly used and preferred in terrestrial hydrological prediction applications. One reason for selecting land models over simpler models is that their physically based backbone enables wider application under different conditions. This study evaluates the temporal variability in streamflow simulations in land models. Specifically, we evaluate how the subsurface structure and model parameters control the partitioning of water into different flow paths and the temporal variability in streamflow. Moreover, we use a suite of model diagnostics, typically not used in the land modeling community to clarify model weaknesses and identify a path toward model improvement. Our analyses show that the typical land model structure, and their functions for moisture movement between soil layers (an approximation of Richards equation), has a distinctive signature where flashy runoff is superimposed on slow recessions. This hampers the application of land models in simulating flashier basins and headwater catchments where floods are generated. We demonstrate the added value of the preferential flow in the model simulation by including macropores in both a toy model and the Variable Infiltration Capacity model. We argue that including preferential flow in land models is essential to enable their use for multiple applications across a myriad of temporal and spatial scales.

AIM: Wetland loss and degradation threaten biodiversity to an extent greater than most ecosystems. Science‐supported responses require understanding of interacting effects of land use and climate change on wetland biodiversity. LOCATION: Alberta, Canada. METHODS: We evaluated how current climate, climate change (as a ghost of the past), land use and wetland water quality relate to aquatic macroinvertebrates and birds. RESULTS: Climatic relationships and climate–land use interactions were observed on chironomid abundance, but not macroinvertebrate taxa richness (MTR) or odonate abundance, which responded to land use and water chemistry. Chironomid abundance was positively associated with cropland and negatively associated with total precipitation. Higher cropland cover and dissolved organic carbon synergistically interacted with total precipitation to affect chironomids. MTR was negatively related to salinity, yet greater area of non‐woody riparian vegetation attenuated salinity effects on MTR. Odonate abundance was negatively related to total phosphorus. Higher grassland cover also increased the negative relationship of total phosphorous to odonate abundance. Climatic relationships and climate–land use interactions were observed on bird species richness (BSR) and abundance of several bird functional groups. Higher BSR and abundances of several bird groups were positively related to average rainfall and greater warming temperatures over time. Area of non‐crop cover and wetlands was positively associated with most bird groups and BSR. Warming temperatures over time ameliorated the negative relationship of higher cropland or less shrubland on aerial insectivores and other bird groups. MAIN CONCLUSIONS: Climate patterns and climate change are as important as land use pressures with stronger impacts on birds. Climate change was more influential than current climate and provided novel empirical evidence that progressively warmer, wetter conditions is benefiting some bird groups, including aerial insectivores, a group of conservation concern. Riparian vegetation ameliorated the negative impacts of climate and water quality gradients on MTR and could mitigate global change impacts in agricultural systems.

In cold region environments, ice‐jam floods (IJFs) pose a severe risk to local communities, economies, and ecosystems. Previous studies have shown that both climate and regulation affect IJF probabilities, but their relative impacts are poorly understood. This study presents a probabilistic modelling framework that couples hydrologic and hydraulic models to assess the relative role of regulated and naturalized flows on ice‐affected backwater staging. The framework is evaluated at an IJF‐prone town on the Peace River in western Canada, which has been regulated since 1972. Naturalized flows were generated for the comparison, and ice‐affected backwater profiles were calculated along jams of varying length and location and for different combinations of model parameters and boundary conditions. Results show significant differences in backwater staging (~2 m for a return period of T = 1:10 year) between two study time periods (1973–1992 vs 1993–2012) as compared with two different hydraulic flow conditions (regulated vs naturalized), suggesting a larger role of climate than regulation in backwater staging. However, regulation was found to offset flood risk during the 1973–1992 period and exacerbate flood risk during the 1993–2012 period.

ABSTRACTIn cold region environments, any alteration in the hydro-climatic regime can have profound impacts on river ice processes. This paper studies the implications of hydro-climatic trends on ri...

AbstractThe regulation of rivers has always been a controversial issue, with potential benefits but also environmental impacts. In western Canada, the construction of W.A.C. Bennett Dam in the head...

AbstractThe regulation of rivers has always been a controversial issue, with potential benefits but also environmental impacts. In western Canada, the construction of W.A.C. Bennett Dam in the head...

AbstractThe regulation of rivers has always been a controversial issue, with potential benefits but also environmental impacts. In western Canada, the construction of W.A.C. Bennett Dam in the head...

Abstract. Drought is a recurring extreme climate event and among the most costly natural disasters in the world. This is particularly true over Canada, where drought is both a frequent and damaging phenomenon with impacts on regional water resources, agriculture, industry, aquatic ecosystems, and health. However, nationwide drought assessments are currently lacking and impacted by limited ground-based observations. This study provides a comprehensive analysis of historical droughts over the whole of Canada, including the role of large-scale teleconnections. Drought events are characterized by the Standardized Precipitation Evapotranspiration Index (SPEI) over various temporal scales (1, 3, 6, and 12 consecutive months, 6 months from April to September, and 12 months from October to September) applied to different gridded monthly data sets for the period 1950–2013. The Mann–Kendall test, rotated empirical orthogonal function, continuous wavelet transform, and wavelet coherence analyses are used, respectively, to investigate the trend, spatio-temporal patterns, periodicity, and teleconnectivity of drought events. Results indicate that southern (northern) parts of the country experienced significant trends towards drier (wetter) conditions although substantial variability exists. Two spatially well-defined regions with different temporal evolution of droughts were identified – the Canadian Prairies and northern central Canada. The analyses also revealed the presence of a dominant periodicity of between 8 and 32 months in the Prairie region and between 8 and 40 months in the northern central region. These cycles of low-frequency variability are found to be associated principally with the Pacific–North American (PNA) and Multivariate El Niño/Southern Oscillation Index (MEI) relative to other considered large-scale climate indices. This study is the first of its kind to identify dominant periodicities in drought variability over the whole of Canada in terms of when the drought events occur, their duration, and how often they occur.

Abstract. Arctic and subarctic regions are amongst the most susceptible regions on Earth to global warming and climate change. Understanding and predicting the impact of climate change in these regions require a proper process representation of the interactions between climate, carbon cycle, and hydrology in Earth system models. This study focuses on land surface models (LSMs) that represent the lower boundary condition of general circulation models (GCMs) and regional climate models (RCMs), which simulate climate change evolution at the global and regional scales, respectively. LSMs typically utilize a standard soil configuration with a depth of no more than 4 m, whereas for cold, permafrost regions, field experiments show that attention to deep soil profiles is needed to understand and close the water and energy balances, which are tightly coupled through the phase change. To address this gap, we design and run a series of model experiments with a one-dimensional LSM, called CLASS (Canadian Land Surface Scheme), as embedded in the MESH (Modélisation Environmentale Communautaire – Surface and Hydrology) modelling system, to (1) characterize the effect of soil profile depth under different climate conditions and in the presence of parameter uncertainty; (2) assess the effect of including or excluding the geothermal flux in the LSM at the bottom of the soil column; and (3) develop a methodology for temperature profile initialization in permafrost regions, where the system has an extended memory, by the use of paleo-records and bootstrapping. Our study area is in Norman Wells, Northwest Territories of Canada, where measurements of soil temperature profiles and historical reconstructed climate data are available. Our results demonstrate a dominant role for parameter uncertainty, that is often neglected in LSMs. Considering such high sensitivity to parameter values and dependency on the climate condition, we show that a minimum depth of 20 m is essential to adequately represent the temperature dynamics. We further show that our proposed initialization procedure is effective and robust to uncertainty in paleo-climate reconstructions and that more than 300 years of reconstructed climate time series are needed for proper model initialization.

Abstract. Drought is a recurring extreme climate event and among the most costly natural disasters in the world. This is particularly true over Canada, where drought is both a frequent and damaging phenomenon with impacts on regional water resources, agriculture, industry, aquatic ecosystems and health. However, nation-wide drought assessments are currently lacking and impacted by limited ground-based observations. This study provides a comprehensive analysis of historical droughts over the whole of Canada, including the role of large-scale teleconnections. Drought events are characterized by the Standardized Precipitation-Evapotranspiration Index (SPEI) over various temporal scales (1, 3, 6, and 12 consecutive months, 6 months from April to September, and 12 months from October to September) applied to different gridded monthly data sets for the period 1950–2013. The Mann Kendall test, Rotated Empirical Orthogonal Function, Continuous Wavelet Transform, and Wavelet Coherence analyses are used, respectively, to investigate the trend, spatiotemporal patterns, periodicity, and teleconnectivity of drought events. Results indicate that southern (northern) parts of the country experienced significant trends towards drier (wetter) conditions although substantial variability exists. Two spatially well-defined regions with different temporal evolution of droughts were identified―the Canadian Prairies and Northern-central Canada. The analyses also revealed the presence of a dominant periodicity of between 8–32 months in the Prairie region, and 8–40 months in the Northern central region. These cycles of low-frequency variability are found to be associated principally to the Pacific-North American (PNA) and Multivariate El Niño/Southern Oscillation Index (MEI) relative to other considered large-scale climate indices. This study is the first of its kind to identify dominant periodicities in drought variability over the whole of Canada in terms of when the drought events occur, the duration, and how often they do so.

Abstract Early ionic pulse during spring snowmelt can account for a significant portion of the total annual nutrient load in seasonally snow-covered areas. Ionic pulses are a consequence of snow grain core to surface ion segregation during metamorphism, a process commonly referred to as ion exclusion. While numerous studies have provided quantitative measurements of this phenomenon, very few process-based mathematical models have been proposed for diagnostic and prognostic investigations. A few early modelling attempts have been successful in capturing this process assuming transport through porous media with variable porosity. However, this process is represented in models in ways that misalign with the mechanistic view of the process described in the literature. In this research, a process-based model is proposed that can simulated ionic pulses in runoff by emulating solute leaching from snow grains during melt and the subsequent vertical solute transport by meltwater through the snowpack. To facilitate its use without the need for snow-physics’ models, simplified alternative methods are proposed to estimate some of the variables required by the model. The model was applied to two regions, and a total of 4 study sites, that are subject to significantly different winter climatic and hydrological conditions. Comparison between observations and simulation results suggest that the model can capture well the overall snow melt runoff concentration pattern, including both the timing and magnitude of the early melt ionic pulse. The model enables the prediction of concentration profiles of the dry (snow) and liquid (wet) fractions within the snow matrix for the first time. Although there is a computational cost associated with the proposed modelling framework, this study demonstrates that it can provide more detailed information about the reallocation and transport of ions through snowpacks, which can ultimately be used to improve nutrient transport predictions during snowmelt.

Abstract Unstructured triangular meshes are an efficient and effective landscape representation that are suitable for use in distributed hydrological and land surface models. Their variable spatial resolution provides similar spatial performance to high-resolution structured grids while using only a fraction of the number of elements. Many existing triangulation methods either sacrifice triangle quality to introduce variable resolution or maintain well-formed uniform meshes at the expense of variable triangle resolution. They are also generally constructed to only fulfil topographic constraints. However, distributed hydrological and land surface models require triangles of varying resolution to provide landscape representations that accurately represent the spatial heterogeneity of driving meteorology, physical parameters and process operation in the simulation domain. As such, mesh generators need to constrain the unstructured mesh to not only topography but to other important surface and sub-surface features. This work presents novel multi-objective unstructured mesh generation software that allows mesh generation to be constrained to an arbitrary number of important features while maintaining a variable spatial resolution. Triangle quality is supported as well as a smooth gradation from small to large triangles. Including these additional constraints results in a better representation of spatial heterogeneity than from classic topography-only constraints.

Climate and land-use changes modify the physical functioning of river basins and, in particular, influence the transport of nutrients from land to water. In large-scale basins, where a variety of climates, topographies, soil types and land uses co-exist to form a highly heterogeneous environment, a more complex nutrient dynamic is imposed by climate and land-use changes. This is the case of the South Saskatchewan River (SSR) that, along with the North Saskatchewan River, forms one of the largest river systems in western Canada. The SPAtially Referenced Regression On Watershed (SPARROW) model is therefore implemented to assess water quality in the basin, in order to describe spatial and temporal patterns and identify those factors and processes that affect water quality. Forty-five climate and land-use change scenarios comprehended by five General Circulation Models (GCMs) and three Representative Concentration Pathways (RCPs) were incorporated into the model to explain how total nitrogen (TN) and total phosphorus (TP) export could vary across the basin in 30, 60 and 90 years from now. According to model results, annual averages of TN and TP export in the SSR are going to increase in the range 0.9–1.28 kg km − 2 year − 1 and 0.12–0.17 kg km − 2 year − 1 , respectively, by the end of the century, due to climate and land-use changes. Higher increases of TP compared to TN are expected since TP and TN are going to increase ∼36% and ∼21%, respectively, by the end of the century. This research will support management plans in order to mitigate nutrient export under future changes of climate and land use.

Abstract Algal simulations in many water quality models perform poorly because of oversimplifications in the process descriptions of the algae growth mechanisms. In this study, algae simulations were improved by implementing variable chlorophyll a/algal biomass ratios in the CE-QUAL-W2 model, a sophisticated two-dimensional laterally-averaged water quality model. Originally a constant in the model, the chlorophyll a/algal biomass ratio was reprogrammed to vary according to the nutrient and light limiting conditions in the water column. The modified model was tested on Lake Diefenbaker, a prairie reservoir in Saskatchewan, Canada, where, similar to many other lakes in the world, field observations confirm variable spatiotemporal ratios between chlorophyll a and algal biomass. The modified version yielded more accurate simulations compared to the standard version and provides a promising algorithm to improve results for many lakes and reservoirs globally.

Abstract The Global Precipitation Measurement (GPM) mission offers new opportunities for modeling a range of physical/hydrological processes at higher resolutions, especially for remote river systems where the hydrometeorological monitoring network is sparse and weather radar is not readily available. In this study, the recently released Integrated Multisatellite Retrievals for GPM [version 03 (V03) IMERG Final Run] product with high spatiotemporal resolution of 0.1° and 30 min is evaluated against ground-based reference measurements (at the 6-hourly, daily, and monthly time scales) over different terrestrial ecozones of southern Canada within a 23-month period from 12 March 2014 to 31 January 2016. While IMERG and ground-based observations show similar regional variations of mean daily precipitation, IMERG tends to overestimate higher monthly precipitation amounts over the Pacific Maritime ecozone. Results from using continuous as well as categorical skill metrics reveal that IMERG shows more satisfactory agreement at the daily and the 6-hourly time scales for the months of June–September, unlike November–March. In terms of precipitation extremes (defined by the 75th percentile threshold for reference data), apart from a tendency toward overdetection of heavy precipitation events, IMERG captured well the distribution of heavy precipitation amounts and observed wet/dry spell length distributions over most ecozones. However, low skill was found over large portions of the Montane Cordillera ecozone and a few stations in the Prairie ecozone. This early study highlights a potential applicability of V03 IMERG Final Run as a reliable source of precipitation estimates in diverse water resources and hydrometeorological applications for different regions in southern Canada.

Abstract Tree ring data provide proxy records of historical hydroclimatic conditions that are widely used for reconstructing precipitation time series. Most previous applications are limited to annual time scales, though information about daily precipitation would enable a range of additional analyses of environmental processes to be investigated and modelled. We used statistical downscaling to simulate stochastic daily precipitation ensembles using dendrochronological data from the western Canadian boreal forest. The simulated precipitation series were generally consistent with observed precipitation data, though reconstructions were poorly constrained during short periods of forest pest outbreaks. The proposed multiple temporal scale precipitation reconstruction can generate annual daily maxima and persistent monthly wet and dry episodes, so that the observed and simulated ensembles have similar precipitation characteristics (i.e. magnitude, peak, and duration)—an improvement on previous modelling studies. We discuss how ecological disturbances may limit reconstructions by inducing non-linear responses in tree growth, and conclude with suggestions of possible applications and further development of downscaling methods for dendrochronological data.

Modeling nutrient transport during snowmelt in cold regions remains a major scientific challenge. A key limitation of existing nutrient models for application in cold regions is the inadequate representation of snowmelt, including hydrological and biogeochemical processes. This brief period can account for more than 80% of the total annual surface runoff in the Canadian Prairies and Northern Canada and processes such as atmospheric deposition, over-winter redistribution of snow, ion exclusion from snow crystals, frozen soils, and snowcovered area depletion during melt influence the distribution and release of snow and soil nutrients, thus affecting the timing and magnitude of snowmelt runoff nutrient concentrations.Research in cold regions suggests that nitrate (NO3) runoff at the field scale can be divided into five phases during snowmelt. In the first phase, water and ions originating from ion-rich snow layers travel and diffuse through the snowpack. This process causes ion concentrations in runoff to gradually increase. The second phase occurs when this snow ion meltwater front has reached the bottom of the snowpack and forms runoff to the edge-of-the-field (EOF). During the third and fourth phases, the main source of NO3 transitions from the snowpack to the soil. Finally, the fifth and last phase occurs when the snow has completely melted, and the thawing soil becomes the main source of NO3 to the stream.In this research, a process-based model was developed to simulate hourly export based on this five-phase approach. Results from an application in the Red River Basin of southern Manitoba, Canada shows that the model can adequately capture the dynamics and rapid changes of NO3 concentrations during this period at relevant temporal resolutions. This is a significant achievement to advance the current nutrient modeling paradigm in cold climates, which is generally limited to satisfactory results at monthly or annual resolutions. The approach can inform catchment-scale nutrient models to improve simulation of this critical snowmelt period.Nutrient exports Winter Snow Nitrate Agriculture Nutrient model

Abstract. Lakes might be sentinels of climate change, but the uncertainty in their main feedback to the atmosphere – heat-exchange fluxes – is often not considered within climate models. Additionally, these fluxes are seldom measured, hindering critical evaluation of model output. Analysis of the Canadian Small Lake Model (CSLM), a one-dimensional integral lake model, was performed to assess its ability to reproduce diurnal and seasonal variations in heat fluxes and the sensitivity of simulated fluxes to changes in model parameters, i.e., turbulent transport parameters and the light extinction coefficient (Kd). A C++ open-source software package, Problem Solving environment for Uncertainty Analysis and Design Exploration (PSUADE), was used to perform sensitivity analysis (SA) and identify the parameters that dominate model behavior. The generalized likelihood uncertainty estimation (GLUE) was applied to quantify the fluxes' uncertainty, comparing daily-averaged eddy-covariance observations to the output of CSLM. Seven qualitative and two quantitative SA methods were tested, and the posterior likelihoods of the modeled parameters, obtained from the GLUE analysis, were used to determine the dominant parameters and the uncertainty in the modeled fluxes. Despite the ubiquity of the equifinality issue – different parameter-value combinations yielding equivalent results – the answer to the question was unequivocal: Kd, a measure of how much light penetrates the lake, dominates sensible and latent heat fluxes, and the uncertainty in their estimates is strongly related to the accuracy with which Kd is determined. This is important since accurate and continuous measurements of Kd could reduce modeling uncertainty.

Complex hydrological models are being increasingly used nowadays for many purposes such as studying the impact of climate and land-use change on water resources. However, building a high-fidelity model, particularly at large scales, remains a challenging task, due to complexities in model functioning and behavior and uncertainties in model structure, parameterization, and data. Global Sensitivity Analysis (GSA), which characterizes how the variation in the model response is attributed to variations in its input factors (e.g., parameters, forcing data), provides an opportunity to enhance the development and application of these complex models. In this paper, we advocate using GSA as an integral part of the modelling process by discussing its capabilities as a tool for diagnosing model structure and detecting potential defects, identifying influential factors, characterizing uncertainty, and selecting calibration parameters. Accordingly, we conduct a comprehensive GSA of a complex land surface-hydrology model, Modelisation Environmentale–Surface et Hydrologie (MESH), which combines the Canadian Land Surface Scheme (CLASS) with a hydrological routing component, WATROUTE. Various GSA experiments are carried out using a new technique, called Variogram Analysis of Response Surfaces (VARS), for alternative hydroclimatic conditions in Canada using multiple criteria, various model configurations, and a full set of model parameters. Results from this study reveal that, in addition to different hydroclimatic conditions and SA criteria, model configurations can also have a major impact on the assessment of sensitivity. GSA can identify aspects of the model internal functioning that are counter-intuitive, and thus, help the modeler to diagnose possible model deficiencies and make recommendations for improving development and application of the model. As a specific outcome of this work, a list of the most influential parameters for the MESH model is developed. This list, along with some specific recommendations, is expected to assist the wide community of MESH and CLASS users, to enhance their modelling applications.

Abstract The relatively low water flow velocities in reservoirs cause them to have high capacities for retaining sediments and pollutants, which can lead to a reduction in downstream nutrient loading. Hence, nutrients can progressively accumulate in reservoirs, resulting in the deterioration of aquatic ecosystems and water quality. Lake Diefenbaker (LD) is a large multipurpose reservoir, located on the South Saskatchewan River (SSR), that serves as a major source of freshwater in Saskatchewan, Canada. Over the past several years, changes in land use (e.g. expansion of urban areas and industrial developments) in the reservoir’s catchment have heightened concerns about future water quality in the catchment and in the reservoir. Intensification of agricultural activities has led to an increase in augmented the application of manure and fertilizer for crops and pasture. Although previous research has attempted to quantify nutrient retention in LD, there is a knowledge gap related to the identification of major nutrient sources and quantification of nutrient export from the catchment at different spatial scales. Using the SPAtially Referenced Regression On Watershed (SPARROW) model, this gap has been addressed by assessing water quality regionally, and identifying spatial patterns of factors and processes that affect water quality in the LD catchment. Model results indicate that LD retains about 70% of the inflowing total nitrogen (TN) and 90% of the inflowing total phosphorus (TP) loads, of which fertilizer and manure applied to agricultural fields contribute the greatest proportion. The SPARROW model will be useful as a tool to guide the optimal implementation of nutrient management plans to reduce nutrient inputs to LD.

In river catchments, sediment fluxes facilitate the transport of nutrients and pollutants and reduce water quality, potentially impacting water body health and altering ecosystem functioning. Sediment transport processes also modify the morphology of catchments, and sediment deposition can reduce flow capacity in rivers and water storage capacity in reservoirs and lakes. In this paper, estimates of suspended sediment yields and concentrations in the South Saskatchewan River catchment located in western Canada are presented. The results stem from a SPARROW model, which indicates that the dominant sources of sediment are represented by agricultural fields and urbanized lands. Analyses of sediment retention in the major catchment reservoirs indicate that, as expected, reservoir storage capacity is negatively correlated with reservoir storage reduction and positively correlated with retention rate. Additionally, reservoir lifespans range from less than 100 years to over 9000 years. The results presented here will be useful to complement local environmental guidelines to allow better management of sediment erosion and deposition in the South Saskatchewan River catchment.

In this study, we built a two-dimensional sediment transport model of Lake Diefenbaker, Saskatchewan, Canada. It was calibrated by using measured turbidity data from stations along the reservoir and satellite images based on a flood event in 2013. In June 2013, there was heavy rainfall for two consecutive days on the frozen and snow-covered ground in the higher elevations of western Alberta, Canada. The runoff from the rainfall and the melted snow caused one of the largest recorded inflows to the headwaters of the South Saskatchewan River and Lake Diefenbaker downstream. An estimated discharge peak of over 5200 m3/s arrived at the reservoir inlet with a thick sediment front within a few days. The sediment plume moved quickly through the entire reservoir and remained visible from satellite images for over 2 weeks along most of the reservoir, leading to concerns regarding water quality. The aims of this study are to compare, quantitatively and qualitatively, the efficacy of using turbidity data and satellite images for sediment transport model calibration and to determine how accurately a sediment transport model can simulate sediment transport based on each of them. Both turbidity data and satellite images were very useful for calibrating the sediment transport model quantitatively and qualitatively. Model predictions and turbidity measurements show that the flood water and suspended sediments entered upstream fairly well mixed and moved downstream as overflow with a sharp gradient at the plume front. The model results suggest that the settling and resuspension rates of sediment are directly proportional to flow characteristics and that the use of constant coefficients leads to model underestimation or overestimation unless more data on sediment formation become available. Hence, this study reiterates the significance of the availability of data on sediment distribution and characteristics for building a robust and reliable sediment transport model.

Abstract. Over recent decades, the global population has been rapidly increasing and human activities have altered terrestrial water fluxes to an unprecedented extent. The phenomenal growth of the human footprint has significantly modified hydrological processes in various ways (e.g. irrigation, artificial dams, and water diversion) and at various scales (from a watershed to the globe). During the early 1990s, awareness of the potential for increased water scarcity led to the first detailed global water resource assessments. Shortly thereafter, in order to analyse the human perturbation on terrestrial water resources, the first generation of large-scale hydrological models (LHMs) was produced. However, at this early stage few models considered the interaction between terrestrial water fluxes and human activities, including water use and reservoir regulation, and even fewer models distinguished water use from surface water and groundwater resources. Since the early 2000s, a growing number of LHMs have incorporated human impacts on the hydrological cycle, yet the representation of human activities in hydrological models remains challenging. In this paper we provide a synthesis of progress in the development and application of human impact modelling in LHMs. We highlight a number of key challenges and discuss possible improvements in order to better represent the human–water interface in hydrological models.

Abstract. A number of global and regional gridded climate products based on multiple data sources are available that can potentially provide reliable estimates of precipitation for climate and hydrological studies. However, research into the consistency of these products for various regions has been limited and in many cases non-existent. This study inter-compares several gridded precipitation products over 15 terrestrial ecozones in Canada for different seasons. The spatial and temporal variability of the errors (relative to station observations) was quantified over the period of 1979 to 2012 at a 0.5° and daily spatio-temporal resolution. These datasets were assessed in their ability to represent the daily variability of precipitation amounts by four performance measures: percentage of bias, root mean square error, correlation coefficient, and standard deviation ratio. Results showed that most of the datasets were relatively skilful in central Canada. However, they tended to overestimate precipitation amounts in the west and underestimate in the north and east, with the underestimation being particularly dominant in northern Canada (above 60° N). The global product by WATCH Forcing Data ERA-Interim (WFDEI) augmented by Global Precipitation Climatology Centre (GPCC) data (WFDEI [GPCC]) performed best with respect to different metrics. The Canadian Precipitation Analysis (CaPA) product performed comparably with WFDEI [GPCC]; however, it only provides data starting in 2002. All the datasets performed best in summer, followed by autumn, spring, and winter in order of decreasing quality. Findings from this study can provide guidance to potential users regarding the performance of different precipitation products for a range of geographical regions and time periods.

Hydrologic model development and calibration have continued in most cases to focus only on accurately reproducing streamflows. However, complex models, for example, the so-called physically based models, possess large degrees of freedom that, if not constrained properly, may lead to poor model performance when used for prediction. We argue that constraining a model to represent streamflow, which is an integrated resultant of many factors across the watershed, is necessary but by no means sufficient to develop a high-fidelity model. To address this problem, we develop a framework to utilize the Gravity Recovery and Climate Experiment's (GRACE) total water storage anomaly data as a supplement to streamflows for model calibration, in a multiobjective setting. The VARS method (Variogram Analysis of Response Surfaces) for global sensitivity analysis is used to understand the model behaviour with respect to streamflow and GRACE data, and the BORG multiobjective optimization method is applied for model calibration. Two subbasins of the Saskatchewan River Basin in Western Canada are used as a case study. Results show that the developed framework is superior to the conventional approach of calibration only to streamflows, even when multiple streamflow-based error functions are simultaneously minimized. It is shown that a range of (possibly false) system trajectories in state variable space can lead to similar (acceptable) model responses. This observation has significant implications for land-surface and hydrologic model development and, if not addressed properly, may undermine the credibility of the model in prediction. The framework effectively constrains the model behaviour (by constraining posterior parameter space) and results in more credible representation of hydrology across the watershed.

This study assesses projected changes to drought characteristics in Alberta, Saskatchewan and Manitoba, the prairie provinces of Canada, using a multi-regional climate model (RCM) ensemble available through the North American Regional Climate Change Assessment Program. Simulations considered include those performed with six RCMs driven by National Center for Environmental Prediction reanalysis II for the 1981–2003 period and those driven by four Atmosphere–Ocean General Circulation Models for the 1970–1999 and 2041–2070 periods (i.e. eleven current and the same number of corresponding future period simulations). Drought characteristics are extracted using two drought indices, namely the Standardized Precipitation Index (SPI) and the Standardized Precipitation Evapotranspiration Index (SPEI). Regional frequency analysis is used to project changes to selected 20- and 50-year regional return levels of drought characteristics for fifteen homogeneous regions, covering the study area. In addition, multivariate analyses of drought characteristics, derived on the basis of 6-month SPI and SPEI values, are developed using the copula approach for each region. Analysis of multi-RCM ensemble-averaged projected changes to mean and selected return levels of drought characteristics show increases over the southern and south-western parts of the study area. Based on bi- and trivariate joint occurrence probabilities of drought characteristics, the southern regions along with the central regions are found highly drought vulnerable, followed by the southwestern and southeastern regions. Compared to the SPI-based analysis, the results based on SPEI suggest drier conditions over many regions in the future, indicating potential effects of rising temperatures on drought risks. These projections will be useful in the development of appropriate adaptation strategies for the water and agricultural sectors, which play an important role in the economy of the study area.

The effects of climate change on April–October short- and long-duration precipitation extremes over the Canadian Prairie Provinces were evaluated using a multi-Regional Climate Model (RCM) ensemble available through the North American Regional Climate Change Assessment Program. Simulations considered include those performed with six RCMs driven by the National Centre for Environmental Prediction (NCEP) reanalysis II product for the 1981–2000 period and those driven by four Atmosphere–Ocean General Circulation Models (AOGCMs) for the current 1971–2000 and future 2041–2070 periods (i.e. a total of 11 current-to-future period simulation pairs). A regional frequency analysis approach was used to develop 2-, 5-, 10-, 25-, and 50-year return values of precipitation extremes from NCEP and AOGCM-driven current and future period simulations that respectively were used to study the performance of RCMs and projected changes for selected return values at regional, grid-cell and local scales. Performance errors due to internal dynamics and physics of RCMs studied for the 1981–2000 period reveal considerable variation in the performance of the RCMs. However, the performance errors were found to be much smaller for RCM ensemble averages than for individual RCMs. Projected changes in future climate to selected regional return values of short-duration (e.g. 15- and 30-min) precipitation extremes and for longer return periods (e.g. 50-year) were found to be mostly larger than those to the longer duration (e.g. 24- and 48-h) extremes and short return periods (e.g. 2-year). Overall, projected changes in precipitation extremes were larger for southeastern regions followed by southern and northern regions and smaller for southwestern and western regions of the study area. The changes to return values were also found to be statistically significant for the majority of the RCM–AOGCM simulation pairs. These projections might be useful as a key input for the future planning of urban drainage infrastructure and development of strategic climate change adaptation measures.

The significance of spatial variability of rainfall on runoff is explored as a function of catchment scale and type, and antecedent conditions via the continuous time, semi-distributed probability distributed model (PDM) hydrological model applied to the Upper Lee catchment, UK. The impact of catchment scale and type is assessed using 11 nested catchments, and further assessed by artificially changing the catchment characteristics and translating these to model parameters (MPs) with uncertainty using model regionalisation. Dry and wet antecedent conditions are represented by ‘warming up’ the model under different rainfall time series. Synthetic rainfall events are introduced to directly relate the change in simulated runoff to the spatial variability of rainfall. Results show that runoff volume and peak are more sensitive to the spatial rainfall for more impermeable catchments; however, this sensitivity is significantly undermined under wet antecedent conditions. Although there is indication that the impact of spatial rainfall on runoff varies as a function of catchment scale, the variability of antecedent conditions between the synthetic catchments seems to mask this significance. Parameter uncertainty analysis highlights the importance of accurately representing the spatial variability of the catchment properties and their translation to MPs when investigating the effects of spatial properties of rainfall on runoff.